Ring Size Charts | Belle Amor Designs

Rings

1.Measure your ring size with a finger strip chart

Attention! Please noted that you should ensure your hand size before you order the rings. If you are not sure of your hand size, you can use our “finger size” guide chart. If you are helping your friends buying, you only have to tell him or her
using a measuring tape to measure the length of finger according to step 1 & 2. then you can use the “Ring Size Table ” to compare with the relevant size matching the length. If you can’t find the same size of the matching length, the size of the order you usually make will increase, so the rings wouldn’t be too small when you wear them.

Step 1: Cut a straight piece of paper, the size is approximately 3 inches (length) *1/2 inches (width).
Step 2: Use a piece of paper to cover around your finger, and make the mark on the end of the paper.

Step 3: Draw X mark on the finger size guide chart, then print it out, stretch this note, mark “X” on the terminal of this note, this is just the right finger size. .

Ring guide chart

2.Determine your ring size with an existing ring

Use a ring that fits you to determine your ring size. Place your ring over the nearest size circle. The inner edge of the ring should align with the outer edge of the circle. If your ring appears to fit between two sizes, buy the larger size.

ring size

We do not carry half sizes. See below for details:

InsideDiameter	InsideCircumference	Ring Size
mm	inches	mm	inches	US Canada	UK Australia Ireland	Japan	Switzerland	Germany	France
11.6	0.458	36.5	1.438	0
11.8	0.466	37.2	1.463	¼
12.0	0.474	37.8	1.488	½	A
12.2	0.482	38.4	1.513	¾	A ½
12.4	0.490	39.1	1.539	1	B	1
12.6	0.498	39.7	1.564	1 ¼	B ½
12.9	0.506	40.4	1.589	1 ½	C			12 ¾	40 ½
13.1	0.514	41.0	1.614	1 ¾	C ½
13.3	0.522	41.6	1.639	2	D	2	1.50	13 ¼	41 ½
13.5	0.530	42.3	1.664	2 ¼	D ½
13.7	0.538	42.9	1.689	2 ½	E	3	2.75	13 ¾	42 ¾
13.9	0.546	43.5	1.714	2 ¾	E ½
14.1	0.554	44.2	1.740	3	F	4	4.00	14	44
14.3	0.562	44.8	1.765	3 ¼	F ½	5	5.25
14.5	0.570	45.5	1.790	3 ½	G			14 ½	45 ¼
14.7	0.578	46.1	1.815	3 ¾	G ½	6	6.50
14.9	0.586	46.7	1.840	4	H	7
15.1	0.594	47.4	1.865	4 ¼	H ½		7.75	15	46 ½
15.3	0.602	48.0	1.890	4 ½	I	8
15.5	0.610	48.7	1.915	4 ¾	J		9.00
15.7	0.618	49.3	1.941	5	J ½	9		15 ¾	49
15.9	0.626	49.9	1.966	5 ¼	K		10.00
16.1	0.634	50.6	1.991	5 ½	K ½	10
16.3	0.642	51.2	2.016	5 ¾	L		11.75	16	51 ¼
16.5	0.650	51.8	2.041	6	L ½	11	12.75
16.7	0.658	52.5	2.066	6 ¼	M	12		16 ½	51 ½
16.9	0.666	53.1	2.091	6 ½	M ½	13	14.00
17.1	0.674	53.8	2.116	6 ¾	N			17	52 ¾
17.3	0.682	54.4	2.141	7	N ½	14	15.25	17 ¼	54
17.5	0.690	55.0	2.167	7 ¼	O
17.7	0.698	55.7	2.192	7 ½	O ½	15	16.50	17 ½	55 ½
17.9	0.706	56.3	2.217	7 ¾	P
18.1	0.714	56.9	2.242	8	P ½	16	17.75	18	56 ¾
18.3	0.722	57.6	2.267	8 ¼	Q
18.5	0.730	58.2	2.292	8 ½	Q ½	17		18 ½	58
18.7	0.738	58.9	2.317	8 ¾	R		19.00
18.9	0.746	59.5	2.342	9	R ½	18		19	59 ½
19.2	0.754	60.1	2.368	9 ¼	S		20.25
19.4	0.762	60.8	2.393	9 ½	S ½	19		19 ½	60 ¼
19.6	0.770	61.4	2.418	9 ¾	T		21.50
19.8	0.778	62.1	2.443	10	T ½	20		20	61 ¼
20.0	0.786	62.7	2.468	10 ¼	U	21
20.2	0.794	63.3	2.493	10 ½	U ½	22	22.75	20 ¼	62 ¾
20.4	0.802	64.0	2.518	10 ¾	V
20.6	0.810	64.6	2.543	11	V ½	23		20 ¾	64 ¼
20.8	0.818	65.2	2.569	11 ¼	W		25.00
21.0	0.826	65.9	2.594	11 ½	W ½	24		21	66
21.2	0.834	66.5	2.619	11 ¾	X
21.4	0.842	67.2	2.644	12	X ½	25	27.50
21.6	0.850	67.8	2.669	12 ¼	Y			21 ¾	67 ¼
21.8	0.858	68.4	2.694	12 ½	Z	26	28.75
22.0	0.866	69.1	2.719	12 ¾	Z ½			22
22.2	0.874	69.7	2.744	13		27
22.4	0.882	70.3	2.769	13 ¼	Z 1
22.6	0.890	71.0	2.795	13 ½
22.8	0.898	71.6	2.820	13 ¾	Z 2
23.0	0.906	72.3	2.845	14	Z 3
23.2	0.914	72.9	2.870	14 ¼
23.4	0.922	73.5	2.895	14 ½	Z 4
23.6	0.930	74.2	2.920	14 ¾
23.8	0.938	74.8	2.945	15
24.0	0.946	75.4	2.970	15 ¼
24.2	0.954	76.1	2.996	15 ½
24.4	0.962	76.7	3.021	15 ¾
24.6	0.970	77.4	3.046	16

Rings

1.Measure your ring size with a finger strip chart

2.Determine your ring size with an existing ring

Share this: